RK3588 LPDDR5 16GB/32GB High-End Board, WF-RK3588S, AndroidSBC, Eindhoven

TL;DR: RK3588 LPDDR5 16GB/32GB High-End Board

SHENZHEN, China, September 10, 2026 - Wanlin Manufacturing Group pushed lot 198 of the WF-RK3588S board out of the Longgang plant this week, 19,500 units for Eindhoven, Netherlands, with the export declaration naming Longgang as the place of origin.

AndroidSBC unveils the nine-model WF-Series custom board line covering Allwinner A133, H618, T527 and Rockchip RK3588, RK3568, RK3566, RK3288 serving Eindhoven, Netherlands. AndroidSBC is releasing the full WF-Series line for Eindhoven and Netherlands: Allwinner A133, H618, and T527 boards on the Allwinner side, and Rockchip RK3588, RK3568, RK3566, and RK3288 boards on the Rockchip side, plus the WF-A133S and WF-RK3588S SOM modules. The family ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, and RoHS documentation handled in-house.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test, and packing under one roof at Longgang in Shenzhen, and it has built boards on Allwinner and Rockchip silicon for overseas OEM customers for over ten years. The WF-Series line-up is deliberately wide: the Allwinner A133 covers cost-sensitive commercial display and advertising work, the H618 covers OTT and Android TV, the T527 covers industrial control and edge inference, and the Rockchip RK3588, RK3568, RK3566, and RK3288 boards cover 8K video wall, industrial edge, machine vision, and POS respectively. Two SOM variants round the range out for customers who bring their own carrier. Buyers in Eindhoven and Netherlands can source any of the nine from one factory with one set of export documents.

WF-RK3588S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Netherlands importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SOM Module and SMARC Carrier Board for Netherlands Buyers

The som module and smarc carrier board sourcing question that Eindhoven distributors keep coming back to is continuity across quarters. The Rockchip RK3588 requires a dedicated wafer slot, and a 19,500-unit order placed against broker inventory often turns into a two-month slip with no warning. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and Netherlands buyers typically find the difference in their own warehouse rather than at the factory.

Documentation closes the list. Buyers in Eindhoven have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC handles it by doing the software burn and the documentation at the factory: every lot leaves Longgang with the certified image loaded, a unit-level burn-in barcode, and a Technical File that carries the test reports. The nine WF-Series boards cover SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers with three memory configurations each, which means a Eindhoven integrator can usually match a customer requirement without a custom run.

For Netherlands specifically, the file travels with the goods. In the Netherlands the market is a distribution hub as much as an end market, so buyers often order for onward shipment into the wider EU. AndroidSBC prepares the CE marking with RDI radio interface registration documentation for RDI, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Rotterdam on the Rotterdam to Yantian lane.

Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards

Three families of board chase the same som module and smarc carrier board socket. The first is legacy silicon at a low price with no software certification, the second is Cortex-A55 hardware with certification but limited decode headroom, and the third carries both yet treats expansion as an afterthought. The WF-RK3588S belongs to the third family and separates itself on Rockchip RK3588, sustained display output under load, and a certified image burned per lot.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC and COM Express Module Engineering Market Trends

Buyers in Eindhoven are reading the SMARC and COM Express Module Engineering curve before they commit to an som module and smarc carrier board programme. Global Growth Insights reports the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, 2025-2035), used here as the Android silicon demand baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-Series in Netherlands:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.

Channel analysts tracking the SMARC and COM Express Module Engineering category note that allocation discipline, not unit price, has become the deciding factor for buyers who need a twelve-month programme to hold.

The common thread in Netherlands is that single orders are being replaced by blanket agreements with a monthly release, because a programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Nordwerk Automation in Eindhoven, Netherlands

Nordwerk Automation, an industrial automation integrator serving the Netherlands market, deployed 7,200 units of the WF-T527 industrial control board for a machine-tool retrofit programme. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 7,200 units of the WF-T527 industrial control board for a machine-tool retrofit programme
• Region: Eindhoven, Netherlands
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Rotterdam via the Rotterdam to Yantian lane

"The T527 gave us the CAN bus, the dual Ethernet, and the NPU on one board. On the previous platform we ran a separate vision controller next to the HMI, and the retrofit cost reflected it."

- Katrin Vogt, Head of Engineering

Field Report: a retail chain signage refresh across Eindhoven, where 19,500 units of the WF-RK3588S board replaced legacy players in store windows

Reporter Sun Ming, on the ground in Eindhoven, Netherlands. Crews worked store by store overnight so trading hours were never interrupted. The WF-RK3588S boards took the estate content package on first boot and reported back to the CMS within the hour. The chain's marketing team re-cut the window loop at 4K once the fleet was live, because the old players had capped it at 1080p.

The line supervisor logged a 41-minute changeover between the WF-RK3588S run and the next lot, which is the kind of number that decides whether a mid-quarter top-up order can be absorbed.

The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 98.72 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with RDI radio interface registration administered by RDI, cleared for entry at Port of Rotterdam on the Rotterdam to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Netherlands importers can hand straight to their customs broker.

Filed by Sun Ming, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588S Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Eindhoven and Netherlands programmes:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.

Partnership Models for Eindhoven Buyers

The WF-Series is available to Netherlands partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. A Eindhoven first order on the WF-RK3588S is normally the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units per shipment, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Netherlands?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any Netherlands-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3588S unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation

Wanlin Manufacturing Group sells the WF-Series overseas through AndroidSBC. Eindhoven and Netherlands importers, brand owners, and channel distributors who want to source the som module and smarc carrier board direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with RDI radio interface registration for Netherlands, administered by RDI, entering at Port of Rotterdam on the Rotterdam to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up an OEM or ODM review, include the target volume, the certification scope you need, and your preferred Incoterm. With those three in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.